Count the hours before you compare crews
Every janitorial price is built on time: how many worker-hours it takes to clean your rooms, multiplied by how often a crew comes. Knowing that number puts you on equal footing with any bid. Add a row for each kind of space in your building, enter its cleanable square feet, set the visits a week and the number of cleaners, and the calculator returns a low and high figure for hours per visit, time on site for the crew, and hours per week and per month.
The math behind every result
The formula is short: cleanable square feet divided by a production rate, the square feet one worker cleans in an hour. ISSA, the cleaning industry association, describes the same division in its guide to calculating cleaning times. A 10,000 square foot office suite works out to about 1.25 to 2.25 worker-hours per visit, because the office rate of 4,500 to 8,000 square feet an hour already blends in its restrooms, lobby and workstations. Give a large restroom block its own row only when you leave that floor area out of the office row.
The fast rate gives the low figure and the slow rate gives the high one. Crew time on site is the worker-hours split across the cleaners you choose, and the weekly and monthly totals multiply by your visits. ISSA itself calls its cleaning times a guide for bidding and estimating rather than a time-motion study, so read every result as a range for your building.
Where each production rate comes from
Each space type in the menu carries a published range, and the sources sit beneath the calculator:
| Space type | Square feet per worker-hour | Source |
|---|---|---|
| Office suites with restrooms, lobby and workstations | 4,500 to 8,000 | CleanLink, typical office building (2017); its 6,500 night average (2014) falls inside |
| Entries, lobbies and hallways | 5,000 to 6,000 | ISSA-based vendor table (rough) |
| Restrooms, by floor area | 322 to 600 | Low: derived from APPA’s top restroom staffing level divided by an 8-hour shift. High: CleanLink (2014) |
| Medical or dental suite | 1,800 to 2,500 | ISSA-based vendor table (rough) |
| Child care or preschool center | 1,100 | CleanLink, day care cleaned five days a week (2017) |
| Classrooms and school buildings | 1,500 to 4,000 | CMM, public and private schools (2017); NCES school levels fall inside |
| Store or showroom floor | 4,000 to 5,500 | ISSA-based vendor table (rough) |
| Warehouse or distribution floor | 5,000 to 7,000 | ISSA-based vendor table (rough) |
Space types marked rough draw on the ISSA-based vendor table, the least precise source here, so read their hours as a wider estimate. The restroom figure is converted from APPA staffing levels, which count a full paid shift with breaks and travel, so it runs slower than task time alone.
Five things that speed up or slow down a crew
Every source behind these rates says the same thing: the pace changes with the building. Before you trust the low or high end, look at five details.
- Level of cleaning. School research from NCES shows how far the target moves the pace. A custodian at its top level covers 10,000 to 11,000 square feet in an 8-hour shift; at the level most schools work to, the same person covers 28,000 to 31,000.
- Floor surfaces. Carpet vacuumed in long passes moves faster than vinyl tile that needs a wet mop, and a polished lobby adds detail work.
- Furniture and clutter. Rows of desks, chairs and personal items slow every dusting and vacuuming pass.
- Restroom count. A building with a restroom group on each floor carries more slow square footage than one shared pair near the lobby.
- Traffic. A busy public entry or a breakroom used through three shifts collects more soil between visits.
Need to see how often each room should be cleaned in the first place? Our guide on how often an office should be cleaned walks through that choice, and the restroom upkeep by traffic level guide covers the slowest rooms in any building.
Mixed buildings, one total
Plenty of commercial buildings put several space types under one roof, and the calculator handles that with extra rows. Take a distribution building with a 40,000 square foot open floor and 6,000 square feet of front offices: with two cleaners on each visit, the result is about 6.5 to 9.25 worker-hours a visit, or 3.25 to 4.75 hours on site. Our industrial cleaning page covers how crews split those two sides of a warehouse.
A medical or dental suite tells the opposite story. At 1,800 to 2,500 square feet an hour, a small clinic can need as much time as an office several times its size, because exam rooms are cleaned to the practice’s own protocol. The medical office cleaning page describes that visit.
Hours here, price on a walkthrough
The calculator stops at hours on purpose. Hours are what you can compare: a bid built on far fewer hours than your range is worth a question about what it leaves out, and our guide to comparing janitorial bids shows what else to line up. For a monthly dollar range, the cleaning cost calculator takes size, building type and visits.
Your written quote follows a free walkthrough. We count the restrooms, look at the floors and traffic, and set the visit length and crew around the hours your building really takes. Send us your square footage and space types with your quote request, and we will bring them to the walkthrough.
A few useful answers
Common questions
How do you calculate cleaning time for a commercial building?
Split the building into kinds of space, divide each one’s cleanable square feet by its production rate in square feet per worker-hour, and add the results. That total is worker-hours per visit; multiply by visits for the week.
How many square feet can one cleaner clean in an hour?
Published rates run from about 4,500 to 8,000 square feet an hour in a typical office building down to roughly 322 to 600 in restrooms, with schools, clinics and child care centers in between.
Why does my result show a range instead of one number?
Each space type carries a low and a high published rate. The fast rate gives the short end and the slow rate gives the long end, and your floors, furniture, restrooms and traffic decide where a crew lands inside it.
Can I use the hours to check a cleaning bid?
Yes. Ask each company how many hours a visit its price covers and set that beside your range. A figure well under the low end usually means rooms or tasks are missing from the bid.
Does the calculator include floor projects like carpet extraction?
No. It counts routine visits only. Carpet extraction, strip and wax and other periodic floor work run at their own rates and are quoted as separate jobs.
Resources

